On-chip multiphoton Greenberger–Horne–Zeilinger state based on integrated frequency combs

One of the most important multipartite entangled states, Greenberger–Horne–Zeilinger state (GHZ), serves as a fundamental resource for quantum foundation test, quantum communication and quantum computation. To increase the number of entangled particles, significant experimental efforts should been invested due to the complexity of optical setup and the difficulty in maintaining the coherence condition for high-fidelity GHZ state. Here, we propose an ultra-integrated scalable on-chip GHZ state generation scheme based on frequency combs. By designing several microrings pumped by different lasers, multiple partially overlapped quantum frequency combs are generated to supply as the basis for on-chip polarization-encoded GHZ state with each qubit occupying a certain spectral mode. Both even and odd numbers of GHZ states can be engineered with constant small number of integrated components and easily scaled up on the same chip by only adjusting one of the pump wavelengths. In addition, we give the on-chip design of projection measurement for characterizing GHZ states and show the reconfigurability of the state. Our proposal is rather simple and feasible within the existing fabrication technologies and we believe it will boost the development of multiphoton technologies.     

基于平面度的燃料电池电化学性能模拟

 固体氧化物燃料电池的翘曲会影响电极-盖板界面的接触情况，从而影响电化学性能，对相关制造工艺提出了很大的挑战．为了分析燃料电池平面度对放电过程的影响，揭示其潜在的风险，我们建立了两个基于有限元法的仿真模型，对考虑平面度缺陷的燃料电池封装和放电进行分析．在对固体氧化物燃料电池进行平面度测量的基础上，首先建立了具有真实燃料电池翘曲特性的几何模型，分析封装过程中接触压力的分布情况．然后将接触电阻的仿真结果导入到三维多物理场耦合模型中，模拟具有平面度缺陷的燃料电池电化学性能．计算结果展示了燃料电池两侧封装过程中接触压力的分布情况．通过对比有接触电阻和无接触电阻的燃料电池电流密度，分析了电池与盖板的接触对放电过程的影响．结果表明，燃料电池的凹陷面较难达到满意的接触状态，需要比凸起面更大的封装压力．燃料电池表面接触电阻的变化将引起电流传导路径的变化，产生局部高电流或低电流．这项工作强调了在燃料电池中保持均匀分布的接触电阻的重要性，为今后的优化工作奠定了基础．     

A general modal frequency-domain vortex lattice method for aeroelastic analyses

The generalized aerodynamic force (GAF) matrix is derived for the Unsteady Vortex Lattice Method (UVLM) without the assumption of out-of-plane dynamics. As a result, the approach naturally includes in-plane motion and forces unlike the doublet lattice method (DLM). The derived UVLM GAF is therefore applicable to industry-standard techniques for aeroelastic stability analyses, such as the p–k method. In this work, the fluid–structure interpolation is performed with radial basis functions for surface interpolation. The generalized aerodynamic forces computed with the UVLM are verified against the DLM from NASTRAN on a simple flat plate configuration. The ability of the UVLM to include steady loads is verified with a T-tail flutter case and the results confirm the importance of including steady loads for T-tail flutter analysis. The modal frequency domain VLM therefore provides the same level of efficiency and accuracy than the DLM, but without the restrictions and with the ability to handle complex geometries. It is therefore a viable replacement to the DLM.     

小直径棒材超声横波检测仿真分析

采用超声水浸聚焦斜入射方式进行小棒材表面、近表缺陷检测时,声波在水/棒和棒/缺陷界面会发生反射、折射、散射、衍射及波形转换等一系列物理变换。此时缺陷可检性对声波入射条件十分敏感,常出现由于检测条件设置不当而导致缺陷漏检、误检的情况。为解决这一问题,本文针对小棒材超声斜入射检测中的主要参数——入射角和水距,开展声场及缺陷声响应仿真,研究检测参数对不同部位缺陷检测能力的影响,并对仿真结果进行试验验证。通过研究得到了检测水距、入射角度对缺陷检测能力的影响,并得到最优检测条件。试验验证结果表明研究制定的检测方案可有效检测出表面、近表面裂纹缺陷。     

Construction of Generalized Diffusion Processes: the Resolvent Approach

In this paper, we define the generalized diffusion operator ■ for two suitable measures on the line, which includes the generators of the birth-death processes, the one-dimensional diffusion and the gap diffusion among others. Via the standard resolvent approach, the associated generalized diffusion processes are constructed.